Release paper, also known as silicone oil paper and anti-stick paper, is mainly used to isolate sticky objects. It has a wide range of applications, such as electronics, food packaging, automotive industry, printing, etc., and the general tape industry is the most widely used. 

 The release paper is divided into silicone oil paper and coated paper (white plastic paper). According to the single and double sides, it can also be divided into double silicone single seals, "one side of silicone oil and one side of film), double silicone (two-sided silicone oil) and single silicon. 

 In the fierce market competition, whoever can use release paper more reasonably and prolong the service life of release paper can occupy a more advantageous position in market payment! 

 The technical parameters of release paper, such as temperature resistance, moisture resistance, flatness, coil resistance, peeling stability, etc., all affect its service life. However, one place that is easy to be ignored is the stitching method of release paper.

Requirements for release paper joints: flat and firm. The splicing method of type paper: the "head-tail" method is commonly used, which is convenient for the release paper to be able to line the paper in both directions. Under special circumstances, the "head-head" connection method can be used (only one-way paper). 

 The common splicing process of the release paper joint is: overlap the two pieces of release paper to be spliced, align the two sides, press the paper with a pressure rod, and then cut it off. After wet the water tape, lay it straight on the back of the two pieces of the release paper splicing place, then use two pieces of dry cloth from the middle of the paper to the middle of the paper to the two sides of the paper, then flatten the paper surface with a roller, and finally iron the front and back of the joint with an electric iron to increase the adhesion of the water tape and the release paper. Flatten the paper on both sides, and finally iron the front and back of the joints with an electric iron to increase the adhesion between the water tape and the release paper. The two sides are not aligned or the middle upturned joints due to improper dry humidity of the water tape must be reconnected. The front of the release paper joint will also be better if it is glued with special tape.

Many small-scale and low-requirement manufacturers directly replace professional joint tape with tone transparent tape. In fact, this seemingly cost-saving method does greatly reduce the quality and service life of offline paper. It is recommended to use high-quality professional junction tape to avoid losing large amounts due to small consumables. According to many users, most of the tapes on the market are fake and inferior Teflon, beautiful and transparent tapes, which do not work. 

 Here you have to judge for yourself. Generally, the professional release paper connection tape material is imported polyester film, which is more expensive. 

 Professional release paper junction tape will ensure that the main engine will not be wasted and lost due to the problem of paper cutting and parking during the joint problem of release paper. 

 The release paper joint is very important for the service life of the release paper, so it is recommended to choose a special one when choosing the joint material, followed by the flatness and firmness of the release paper joint.